What Are The Precautions For The Installation Of Simulated Dinosaurs

Although the simulation dinosaur will do a comprehensive safety inspection before leaving the factory, it is limited to the product itself. In the on-site installation of some large dinosaurs, if the installation is improper, it will have a huge impact on the subsequent installation work, so generally either the company is manufacturing Complete the installation under the guidance of the dealer, or install it by a professional installer. Before making large-scale simulation dinosaurs, professional manufacturers will reserve a flange position. When the height or length reaches a certain level, the flange must be installed just in case, which is also a detail that cannot be ignored.

What are the precautions for the installation of simulated dinosaurs?

1. When processing the incision at the installation location, please use household needle and thread to sew the incision, and use acid glass glue to spread the sewn incision evenly. If the glass glue is not used for waterproofing, it will cause water to enter the dinosaur cut and damage the motor if it encounters heavy rain.

2. The workers are working at heights, so when tying the safety ropes, they need to add spare safety ropes, and they must wear dry powder fire extinguishers at all times to prevent the occurrence of simulated dinosaur burning accidents.

3. The chassis of the simulated dinosaur is fixed according to the different requirements of Party A. Some require expansion screws, others require hardened chassis of cement and commercial concrete. However, whichever method is used to secure the chassis, it needs to be secured with wind ropes. Oversized dinosaurs have large windward sides and must be secured with wind ropes for safety.

4. The installation of the dinosaur simulation requires the use of a crane. As long as the boom is long enough, there is no limit to the tonnage of the crane. It is necessary to pay attention to whether the wire rope is fixed and whether it is perpendicular to the ground.

5. Regardless of the size of the dinosaur, it is always made of gasoline diluted paint and other materials. This is a very flammable material. Especially when the gasoline is evaporating at the time of installation. Once it encounters Mars, it will burn instantly. Therefore, smoking should be strictly prohibited, otherwise the consequences of fire will be disastrous.

6. When using the wire rope to bind the parts of the simulation dinosaur, please pay attention to be perpendicular to the ground, which will be more convenient when aligning the flanges and tightening the screws.