Common Fault Maintenance Of Simulated Dinosaurs

After the simulated dinosaur is powered on, there is no response;

Solution: Check whether the indicator light of the controller is on. If the indicator light is on, and the machine still does not respond by shaking the arm in front of the induction probe, it may be that the induction probe is damaged. Judging by the way of changing the induction probe, after confirming the fault, take out the new induction probe from the maintenance accessories package to replace or directly contact us for mailing.

Dinosaurs move, but not fully (for example, just the mouth doesn't respond)

Solution: The machine has an action, but only a certain action fails. At this time, it is predicted that the fuse corresponding to this action is blown. You need to use a screwdriver to open the black controller and visually check whether there is a fuse on the circuit board. phenomenon (the fuse is a car transparent casing insurance, you can check whether the wire is broken by your eyes), if there is, take out the fuse of the corresponding color from the repair kit and replace it, but if the fuse is still damaged after the replacement, the Contact us immediately.

When the dinosaur's mouth is open, there is no roar

Solution: When the dinosaur opens its mouth, there is no sound in the speaker; if it is an external speaker, first observe whether the power indicator on the speaker lights up when the mouth is open. If it lights up, it may be that the SD card inserted in the speaker is in poor contact Or damaged; if the speaker indicator is not on, it may be that the external speaker is damaged, and it can be replaced if necessary, otherwise please contact us directly.

If it is a built-in speaker, it may be that the speaker is damaged or the controller is faulty, please contact us directly.

Dinosaur's skin was damaged by sharp weapons, cracks appeared

Solution: The dinosaur skin is composed of silicone glue and fiber cloth. If the skin is cut by a sharp tool during use, it is easy to have a crack. At this time, you can use a needle and thread to sew up the crack (try to make the suture neat), and then Take out the transparent glass glue from the repair accessories bag, apply a layer of glass glue evenly to the sewn crack, and wait for it to dry for easy repair.